(DEPRECATED) Apache Flink User Mailing List archive.

Re: Flink Checkpoint runs slow for low load stream

Posted by Stephan Ewen on
URL: http://deprecated-apache-flink-user-mailing-list-archive.369.s1.nabble.com/Flink-Checkpoint-runs-slow-for-low-load-stream-tp9147p9181.html

@vinay - Is it in your case large state that causes slower checkpoints?

On Mon, Sep 26, 2016 at 6:17 PM, vinay patil <[hidden email]> wrote:
Hi,

I am also facing this issue, in my case the data is flowing continuously from the Kafka source, when I increase the checkpoint interval to 60000, the data gets written to S3 sink.

Is it because some operator is taking more time for processing, like in my case I am using a time window of 1sec.

Regards,
Vinay Patil

On Mon, Sep 26, 2016 at 10:08 AM, Chakravarthy varaga [via Apache Flink User Mailing List archive.] <[hidden email]> wrote:
Hi Stefan,

    Please find my responses below.

    - What source are you using for the slow input?
     [CVP] - Both stream as pointed out in my first mail, are Kafka Streams
  - How large is the state that you are checkpointing?
     [CVP] - I have enabled checkpointing on the StreamEnvironment as below.
         final StreamExecutionEnvironment streamEnv = StreamExecutionEnvironment.getExecutionEnvironment();
         streamEnv.setStateBackend(new FsStateBackend("file:///tmp/flink/checkpoints"));
         streamEnv.enableCheckpointing(10000);

      In terms of the state stored, the KS1 stream has payload of 100K events/second, while KS2 have about 1 event / 10 minutes... basically the operators perform flatmaps on 8 fields of tuple (all fields are primitives). If you look at the states' sizes in dashboard they are in Kb...

  - Can you try to see in the log if actually the state snapshot takes that long, or if it simply takes long for the checkpoint barriers to travel through the stream due to a lot of backpressure?
    [CVP] -There are no back pressure atleast from the sample computation in the flink dashboard. 100K/second is low load for flink's benchmarks. I could not quite get the barriers vs snapshot state. I have attached the Task Manager log (DEBUG) info if that will interest you.
 
     I have attached the checkpoints times' as .png from the dashboard. Basically if you look at checkpoint IDs 28 & 29 &30- you'd see that the checkpoints take more than a minute in each case. Before these checkpoints, the KS2 stream did not have any events. As soon as an event(should be in bytes) was generated, the checkpoints went slow and subsequently a minute more for every checkpoint thereafter.

   This log was collected from the standalone flink cluster with 1 job manager & 2 TMs. 1 TM was running this application with checkpointing (parallelism=1)
 
    Please let me know if you need further info.,
    

On Fri, Sep 23, 2016 at 6:26 PM, Stephan Ewen <[hidden email]> wrote:
Hi!

Let's try to figure that one out. Can you give us a bit more information?

  - What source are you using for the slow input?
  - How large is the state that you are checkpointing?
  - Can you try to see in the log if actually the state snapshot takes that long, or if it simply takes long for the checkpoint barriers to travel through the stream due to a lot of backpressure?

Greetings,
Stephan



On Fri, Sep 23, 2016 at 3:35 PM, Fabian Hueske <[hidden email]> wrote:
Hi CVP,

I'm not so much familiar with the internals of the checkpointing system, but maybe Stephan (in CC) has an idea what's going on here.

Best, Fabian

2016-09-23 11:33 GMT+02:00 Chakravarthy varaga <[hidden email]>:
Hi Aljoscha & Fabian,

    I have a stream application that has 2 stream source as below.

     KeyedStream<String, String> ks1 = ds1.keyBy("*") ;
     KeyedStream<Tuple2<String, V>, String> ks2 = ds2.flatMap(split T into k-v pairs).keyBy(0);

     ks1.connect(ks2).flatMap(X);
     //X is a CoFlatMapFunction that inserts and removes elements from ks2 into a key-value state member. Elements from ks1 are matched against that state. the CoFlatMapFunction operator maintains ValueState<Tuple2<Long, Long>>;

     //ks1 is streaming about 100K events/sec from kafka topic
     //ks2 is streaming about 1 event every 10 minutes... Precisely when the 1st event is consumed from this stream, checkpoint takes 2 minutes straight away.

    The version of flink is 1.1.2.

I tried to use checkpoint every 10 Secs using a FsStateBackend... What I notice is that the checkpoint duration is almost 2 minutes for many cases, while for the other cases it varies from 100 ms to 1.5 minutes frequently. I'm attaching the snapshot of the dashboard for your reference.

     Is this an issue with flink checkpointing?

 Best Regards
CVP




flink_job_Plan.png (42K) Download Attachment
Flink-Checkpoint-Times.png (65K) Download Attachment
flink-qchavar-taskmanager-1-elxa1h67k32.log (442K) Download Attachment


To start a new topic under Apache Flink User Mailing List archive., email [hidden email]
To unsubscribe from Apache Flink User Mailing List archive., click here.
NAML


View this message in context: Re: Flink Checkpoint runs slow for low load stream
Sent from the Apache Flink User Mailing List archive. mailing list archive at Nabble.com.

Free forum by Nabble Edit this page